If your bathroom is smelling like a sewer It’s time to sniff around to find the cause and get it fixed for good.
Have you ever walked into the bathroom and thought, phew! what’s that smell?
Bathrooms are supposed to be clean and hygienic however, they may emit a strong odor. There are five reasons why your bathroom is smelling like a sewer and how to get rid of the smell.
Five reasons why your bathroom smells like a sewer
1. Dry Floor Detritus
Dry floor waste is typically the main reason why your bathroom smells like the sewer, because it’s let the gasses of sewer escape through the cracks within the flooring.
Floor waste refers to the drain that is grated located in the middle of your bathroom. The grate can be taken off and a torch may be used to inspect the water seal on in the middle of your waste. If there isn’t any water in the base of the drain then the floor waste is dry and allowing sewer smells to flow straight through your bathroom.
It’s a simple fix that will require running water through the bath, shower or basin to create the seal. If the water isn’t sitting in the trap’s bottom trap, and you are living in Jumeirah, you’ll need a Emergency Plumber in Jumeirah to determine the cause.
When the waste on your floor is located in the bathroom and is being used to store things then fill a bucket water and pour it over the grille. Shower wastes also need to be sealed with water therefore, make sure to check this when you inspect your floor’s waste.
2. Blockage of fixture traps
There’s a trap beneath your bath, basin and shower. It can collect congealed waste that has been formed by soap, toothpaste and hair. The bacteria that live in the trap could cause an unpleasant smell in the bathroom.
There are several ways to address this.
Another option is to use an organic cleaner to eliminate the smell. Another option is to use the drain cleaner machine to give an intensive clean. If you have a waste in your basin it is possible to replace the basin trap, which includes the waste and plug.
3. The rubber seal has deteriorated on the toilet pan connector
A toilet trap that is not concealed has an elastomer seal around the connector for the toilet pan. Plumbers refer to this as”the pan collar.
Sometimes, the seal’s rubber wears out in time, allowing sewer gasses out into the atmosphere. It is recommended to contact an experienced Toilet Plumbing Jumeirah to repair this issue as they will need to replace the seal, which implies that the toilet must be removed.
If your toilet is hard to take off The plumber may mold the epoxy sealant (like the ferope) on the pan in order to create a seal. In certain situations, the entire pan connector could be replaced.
It’s less apparent with hidden toilets. Take a look around the toilet to determine whether the smell emanates from the bathroom.
4. Insufficient ventilation
A hot bathroom is the ideal environment for mildew and mould to grow.
The best method to prevent mold on the plasterboard walls or ceiling is to keep an open window while showering or switching on the exhaust fan to draw in the hot steam.
The formation of mould can result due to a slow leak of water in the bathroom wall. It is recommended to call an expert Local Plumbing Company Jumeirah to find the leak’s source and repair it in order to stop further growth, as this could become a health risk.
5. Toilet partially blocked
A toilet that is blocked will always have a smell. By squeezing the toilet, you can remove the blockage, but in the event that it fails then a plumber needs to be contacted with an equipment to clear the obstruction.
